RPi 3 Wlan einrichten

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • RPi 3 Wlan einrichten

      Habe jetzt Wlan einrichten können.

      In "/etc/network/interfaces" eingetragen:

      Source Code

      1. #Datei: /etc/network/interfaces
      2. # Please note that this file is written to be used with dhcpcd.
      3. # For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'.
      4. auto lo
      5. iface lo inet loopback
      6. auto eth0
      7. allow-hotplug eth0
      8. iface eth0 inet manual
      9. auto wlan0
      10. allow-hotplug wlan0
      11. iface wlan0 inet manual
      12. wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
      13. auto wlan1
      14. allow-hotplug wlan1
      15. iface wlan1 inet manual
      16. wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
      Display All


      In "/etc/wpa_supplicant/wpa_supplicant.conf" eintragen:


      Source Code

      1. #Datei: /etc/wpa_supplicant/wpa_supplicant.conf
      2. ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
      3. update_config=1
      4. network={
      5. ssid="SSID"
      6. psk="WLAN-Passwort"
      7. }
      Zum Schluss noch in "/etc/dhcpcd.conf" am Ende der Datei:



      Source Code

      1. interface eth0
      2. static ip_address=192.168.xxx.xxx/24 IP des Raspis
      3. static routers=192.168.xxx.x IP des Routers
      4. static domain_name_servers=192.168.xxx.x IP des Routers
      5. interface wlan0
      6. static ip_address=192.168.xxx.xxx/24 IP des Raspis
      7. static routers=192.168.xxx.x IP des Routers
      8. static domain_name_servers=192.168.xxx.x IP des Routers
      Jetzt noch den DHCP-Clienten starten mit:


      sudo service dhcpcd start
      sudo systemctl enable dhcpcd
      Kann besser Hardware als Software !